AC Variable-frequency Resonance Test System(Cable, GIS test)

Variable Frequency Resonance Test Set Resonant Hipot Test Equipment

Variable Frequency Resonance Test Set Resonant Hipot Test Equipment

CYBP-BD series variable frequency resonant device is a common primary electrical equipment of substations. It is applied for voltage withstand test of capacitive equipment, such as transformer, GIS system, SF6 switch, CT/PT, insulator, busbar, cable and bushing ect.

Product Characteristics

Model NO.
CYBP-BD
Rated Output Voltage
≤0~1000kv
Output Frequency
30~300Hz
Resonate Voltage Waveform
Sine Wave, Distortion≤1.0%
Working Mode
Continuous Working
Quality Factor
30~90
Frequency Adjustment Sensitivity
0.1Hz
Instability
<0.05%
Transport Package
Wooden Box with Wrapping Film
Specification
ISO9001, ISO14001, OHSAS18001
Trademark
United Electrical
Origin
Wuhan, Hubei
HS Code
9030339000
I.Product Description:
CYBP-BD series variable frequency resonant device is a common primary electrical equipment of substations. It is applied for voltage withstand test of capacitive equipment, such as transformer, GIS system, SF6 switch, CT/PT, insulator, busbar, cable and bushing ect. This device is researched and manufactured according to withstand test regulations of 220KV and blow substations primary electrical equipment. The AC/DC voltage withstand test equipment both need satisfy high voltage, small current and low voltage, large current test condition, and with wide application range. HZBP using the principle of series resonant, is composed by variable frequency power source control box(console), excitation transformer, reactor and capacitive voltage divider,compensating capacitor.

II.Product Features:
1.It has smaller volume and lighter weight compared with the same voltage grade and capacity reactor. Temperature rises small at the rated load. Dry-type epoxy resin casting with high mechanical strength, good electrical insulating property, nice appearance and reliability.
2.Variable power source control box has large capacity, strong protection function, good output wave, good stability and various working modes that easy to operate. Single phase 220V and three phase 380V input power source are in common use, convenient to take electricity on site.
3.Flexible configuration. Can equip with different types of reactor to satisfy different tested products. To achieve a multi-purpose machine, highly cost effective.

III.Product parameters:
Rated Output Voltage≤0~1000kV
Output Frequency30~300Hz
Resonate Voltage WaveformSine wave, distortion≤1.0%
Working ModeContinuous working
Quality Factor30~90
Frequency Adjustment Sensitivity0.1Hz
Instability<0.05%
Power SourceSingle phase 220V or three phase 380V±10%
Power frequency 50Hz/60Hz±5%
Technique index 
Serial products and application
ModeApplication(10kV~500kV transformer substation AC voltage withstand equipment, frequency 30~300Hz)
Frequency Power SourceResonant ReactorExcitation transformerDividerApplication
CYBP-BD-50/50/253kW25kV/1A two sets(dry type)3kVA(dry type)50kV≤1000kVA 10kV transformer
10kV switch, busbar, PT, CT ect.
10kV(300mm2) cable≤1.0km
CYBP-BD-108/108/275kW27kV/1A four sets(dry type)5kVA(dry type)110kV≤31500kVA 35kV transformer
35kV switch, busbar, PT, CT ect.
10kV(300mm2) cable 2km
35kV(300mm2) cable 0.5km
CYBP-BD-200/200/5010kW50kV/1A four sets(dry type)10kVA(dry type)200kV≤50000kVA 110kV transformer
110KV GIS, PT, CT ect.(preventive test)
35kV(300mm2) cable ≤1.0km
10kV(300mm2) cable ≤2.0km
CYBP-BD-270/270/4515kW45kV/1A six sets(dry type)15kVA(dry type)300kV≤50000kVA 110kV transformer
110kV GIS, PT, CT ect.
35kV(300mm2) cable ≤1.2km
10kV(300mm2) cable ≤3.0km
CYBP-BD-800/400/5030kW50kV/2A eight sets(dry type) 100kV/2A four sets(oil immersed)30kVA(dry type)
30kA(oil immersed)
400kV≤80000kVA 220kV transformer
≤50000kVA 110kV transformer
110kV/220kV GIS, PT, CT ect.
35kV(300mm2) cable ≤2.0km
110kV(300mm2) cable ≤0.7km
CYBP-BD-1600/800/20060kW200kV/2A four sets(oil immersed)60kVA(dry type)800kV≤80000kVA 220kV transformer
≤50000kVA 110kV transformer
500kV GIS, PT, CT ect.
220kV switch, busbar, PT, CT ect.
110kV(400mm2) cable ≤1.5km
220kV(400mm2) cable ≤1.0km
Note: can be customized
Company Profile

Kiyu Power is a high-tech enterprise professionally engaged in R & D, manufacture and marketing of power testing products, instruments, power industry automation systems for 20 years.We export completed set to Korea, Singapore, Vietnam, India, Ecuador, Paraguay, Pakistan, Philippines, Russia, Italy, Austria, Portugal, Chile such as PD test system, impulse voltage generator, temperature rising test system, transformer comprehensive test system, cable fault detect system and varies of instruments for transformer, circuit breaker, switchgear, lightning arrestor, insulator, cable, battery,SF6 gas and so on.

Competitive Products

Certifications

Customer Visit

On-site Service

Package and Delivery